About the OXVA Xlim Pro 3
The Xlim Pro 3 is OXVA's flagship pod kit for 2025, the latest in a line that has been one of the most popular refillable pod systems in the UK market since the original Xlim launched. OXVA is a Chinese vape hardware brand with a strong reputation for build quality, flavour accuracy and pod compatibility across generations.
The Pro 3 follows the Pro 2 with a larger battery, a brighter screen, and the introduction of OXVA's Pulse System a power management feature that keeps wattage output stable across the entire battery discharge cycle. Most pod kits lose power and flavour consistency as the battery runs low. The Pulse System is designed to prevent that, delivering the same output from a full charge down to near-empty.
The kit ships with two Xlim V3 Top-Fill pods (0.6ohm pre-installed, 0.8ohm spare) and a USB-C cable. It is compatible with the full Xlim pod range across four resistance options, so you can switch between a tight MTL draw and a more open RDL draw by changing the pod and adjusting the airflow slider.
Xlim Pro 3 Specs
| Spec |
Detail |
| Battery |
1500mAh built-in, USB-C 5V/2A fast charge (cable included) |
| Charge speed |
80% in approximately 30 minutes |
| Output |
5 to 30W adjustable |
| Chip |
Photon chip with Pulse System |
| Display |
1.05" HD colour screen (wattage, battery %, coil resistance, puff count) |
| Pod capacity |
2ml (TPD) |
| Pod fill |
Top-fill |
| Compatible pods |
Xlim V3 Top-Fill: 0.4ohm, 0.6ohm, 0.8ohm, 1.2ohm |
| Airflow |
Side slider, adjustable MTL to RDL |
| Activation |
Auto-draw and button |
| Body material |
Zinc alloy |
| Dimensions |
119.9 x 25.7 x 15mm |
| Weight |
77.4g |
| In the box |
Device, 0.6ohm V3 pod (pre-installed), 0.8ohm V3 pod, USB-C cable, manual |
| Price |
£26.99 |
Pulse System: What It Does and Why It Matters
The Pulse System is the headline feature that separates the Pro 3 from the Pro 2 and from most other pod kits at this price. Conventional pod kits deliver power via a continuous voltage that drops as the battery drains. This means your vape gets progressively weaker and less flavourful the lower the battery gets.
The Pulse System works differently. The Photon chip delivers power in rapid, tightly controlled pulses rather than a continuous output. It monitors coil resistance and battery voltage in real time and adjusts each pulse to maintain the target wattage, regardless of where the battery sits. The practical result is that flavour and vapour stay consistent from the first puff on a full battery to the last puff before charging.
All 9 Xlim Pro 3 Finishes
| Finish |
Description |
| Black Carbon |
Carbon fibre texture panel, gloss black frame |
| Black Leather |
Leather-effect panel with black metal frame |
| Brown Leather |
Warm brown leather-effect panel with contrasting frame |
| Pro Carbon |
Carbon fibre texture in a lighter tonal colourway |
| Pink Silk |
Smooth silk-effect finish in soft pink |
| Purple Silk |
Smooth silk-effect finish in deep purple |
| Race Red |
Bold gloss red with carbon-effect accents |
| Sky Blue |
Clean sky blue with subtle metallic finish |
| Titanium Silk |
Premium titanium-toned silk-effect finish |
Pod Options and Draw Styles
The Xlim Pro 3 is compatible with all Xlim V3 Top-Fill pods. Each pod contains an integrated mesh coil you replace the whole pod rather than swapping coils separately. Pods are available in four resistances, each suited to a different draw style and e-liquid type.
| Pod |
Recommended wattage |
Draw style |
Best for |
| 1.2ohm |
10 to 12W |
Tight MTL |
Nic salt, smokers switching to vaping |
| 0.8ohm |
12 to 18W |
Warm MTL |
Nic salt or 50/50 freebase |
| 0.6ohm |
20 to 25W |
Restricted RDL |
50/50 freebase, lower-strength nic salt |
| 0.4ohm |
26 to 30W |
Open RDL |
50/50 freebase, lower-strength nic salt |
The kit ships with 0.6ohm and 0.8ohm pods. If you want a tighter draw, pick up a 0.8ohm or 1.2ohm pod separately and close down the airflow slider. If you prefer a more open, lung-filling draw, the 0.6ohm pre-installed pod at 20 to 25W with the slider open is a good starting point.
Avoid high-VG liquids (70/30 or above). The 2ml pods wick best with 50/50 or nic salt e-liquids. See our full e-liquid range for compatible options.
Who Is the Xlim Pro 3 For?
The Xlim Pro 3 is well suited to vapers who want a premium, carry-every-day device that does not need to be replaced when the pods run out. You keep the device and buy replacement pods, making it considerably cheaper to run over time than a prefilled kit. The refillable format also means you can use any e-liquid you like rather than being limited to a brand's own flavour range.
If you are switching from cigarettes, the 0.8ohm or 1.2ohm pod with nic salt gives the closest experience to the resistance and throat hit of a cigarette. If you are an experienced vaper looking for a premium compact device, the Pulse System and adjustable wattage give you more control than most devices at this size and price.
For vapers who want more power and the dual mesh coil system, see the OXVA NeXlim, which runs up to 40W with Boost and Eco modes.
Buy the OXVA Xlim Pro 3
9 finishes at £26.99 per kit. Free delivery on orders over £20. Order before 6pm for same-day dispatch.
Popular starting points: Black Carbon, Titanium Silk, Race Red, Pink Silk.
OXVA Xlim Pro 3 FAQs
What e-liquid should I use with the Xlim Pro 3?
Use 50/50 e-liquid or nicotine salt with the 0.6ohm, 0.8ohm and 1.2ohm pods. These wick well in the 2ml pod format and give the best flavour. Avoid high-VG liquids (70/30 or above) as they wick too slowly in small pod coils and cause dry hits. If you are switching from cigarettes, a nic salt in 10mg or 20mg with the 0.8ohm or 1.2ohm pod is the most straightforward starting point.
What pods are compatible with the Xlim Pro 3?
The Xlim Pro 3 is compatible with all Xlim V3 Top-Fill pods in 0.4ohm, 0.6ohm, 0.8ohm and 1.2ohm. It is also compatible with the wider Xlim and EZ pod range. The kit ships with 0.6ohm and 0.8ohm pods. Replacement pods are available separately.
How long does the Xlim Pro 3 battery last?
The 1500mAh battery lasts most vapers a full day of moderate use on a single charge. Higher wattage and RDL vaping will drain it faster. When it does run low, USB-C fast charging (5V/2A) gets it back to 80% in around 30 minutes. A USB-C cable is included in the box.
What is the Pulse System on the Xlim Pro 3?
The Pulse System is OXVA's power management feature on the Pro 3. It delivers power in controlled pulses rather than a continuous voltage, keeping wattage output stable across the full battery discharge cycle. This means flavour stays consistent even when the battery is running low, rather than dropping off as it typically does on conventional pod kits.
What is the difference between the Xlim Pro 3 and the OXVA NeXlim?
The Xlim Pro 3 runs up to 30W, uses single mesh coil Xlim pods, and has a 1.05" HD screen. The NeXlim runs up to 40W, uses dual mesh coil NeXlim pods, has Boost and Eco modes for switching between maximum flavour and extended pod life, and has a 0.85" colour screen. The Pro 3 is the more compact device at 77.4g. The NeXlim is slightly larger at 87.5g and suited to vapers who want higher output and the dual mesh system.
How do I fill the Xlim Pro 3 pod?
The Xlim V3 pod uses a top-fill design. Open the fill port on the top of the pod, add your e-liquid, and close it back. You do not need to remove the pod from the device to fill it. After filling a new pod for the first time, wait around five minutes before vaping to allow the coil to fully saturate. This prevents dry hits and extends pod life.
0
